Měřicí technika
Měřicí technika
Millimar EMD-832P-50-W2 Electronic spirit level system for flatness measurement
CS
Vlastnosti produktu
  • Show any change in this relationship over time
  • Compare the orientation attitude of separate or adjacent horizontal surfaces
  • Show any change in this comparison over time
  • Level systems are angular-linear compatible
  • Sensing heads are interchangeable with Mahr Federal’s gage heads to accommodate linear measurements
  • Fast Response: quick response to slight angular changes permit taking fast and accurate measurements at various sensing head positions or taking dynamic position readings
  • Direct Dimensional Readout: multiplier feature permits operator to view displacement caused by the angular measurement of the level head; this is displayed as an inches per foot readout rather than arc seconds: eliminates readout confusion when switching from spirit levels to electronic levels
  • Angular-Linear Compatible: sensing heads are easily interchangeable with Mahr Federal gage heads to accommodate linear measurements
  • Operator Friendly: Level systems are often compared to the autocollimator or laser calibration systems. In each case, the measurement technique is basically the same. Electronic Levels, however, are much easier to set up and operate. Results are obtained cost-effectively without requiring time consuming sight path alignments. There are no optical surfaces to keep clean, and the Level does not need a turbulence-free environment to achieve accurate readings
Ideally suited for highly precise profiles as surface plate and large machine surfaces, eliminating tedious and time consuming data recording and calculating required by manual systems.
  • Technické parametry

Obj. č.Typ produktuRozsah zobrazení číslic µmRozsah zobrazení číslic inchHodnota rozlišení µmHodnota rozlišení arc secHodnota rozlišení kolaZobrazení toleranceVstupy pro snímačDynamické funkceKlasifikaceDatové rozhraníŘídicí vstupyŘídicí výstupyAnalogový výstupNapájení energiíKompatibilita
2120552
EMD-832P-50-W1
± 2000 / ± 200 / ± 20
± .100" / ± .010" / ± .001"
1 / 0,1 / 0,02
0,1 arc sec / 1 arc sec
0,005 mrad / 0,0005 mrad
LED 5 Class
2
Max, min, TIR, Nominal
5
RS232C
3
5
±5Vdc
Akumulátor, 10 h za plného zatížení nebo 120VAC/240 VAC 50-60 Hz přes síťový zdroj
Federal
2120553
EMD-832P-50-W2
± 2000 / ± 200 / ± 20
± .100" / ± .010" / ± .001"
1 / 0,1 / 0,02
0,1 arc sec / 1 arc sec
0,005 mrad / 0,0005 mrad
LED 5 Class
2
Max, min, TIR, Nominal
5
RS232C
3
5
±5Vdc
Provoz na baterie / 230 V / 50 Hz
Federal