Měřicí technika
Měřicí technika
Millimar EMD-832P-48-W2 Elektronický systém vyrovnávací váhy pro diferenční měření
CS
Vlastnosti produktu
  • Show any change in this relationship over time
  • Compare the orientation attitude of separate or adjacent horizontal surfaces
  • Show any change in this comparison over time
  • Level systems are angular-linear compatible
  • Sensing heads are interchangeable with Mahr Federal’s gage heads to accommodate linear measurements
  • Fast Response: quick response to slight angular changes permit taking fast and accurate measurements at various sensing head positions or taking dynamic position readings
  • Direct Dimensional Readout: multiplier feature permits operator to view displacement caused by the angular measurement of the level head; this is displayed as an inches per foot readout rather than arc seconds: eliminates readout confusion when switching from spirit levels to electronic levels
  • Angular-Linear Compatible: sensing heads are easily interchangeable with Mahr Federal gage heads to accommodate linear measurements
  • Operator Friendly: Level systems are often compared to the autocollimator or laser calibration systems. In each case, the measurement technique is basically the same. Electronic Levels, however, are much easier to set up and operate. Results are obtained cost-effectively without requiring time consuming sight path alignments. There are no optical surfaces to keep clean, and the Level does not need a turbulence-free environment to achieve accurate readings
The Differential Level System operates simultaneously with a single amplifier, permitting an immediate comparison between two surfaces.
Adjustable basespermit setup on surfaces that are out-of-level or square by as much as ± 1.5°
  • Technické parametry

Obj. č.Typ produktuRozsah zobrazení číslic µmRozsah zobrazení číslic, palceRozlišení µmHodnota rozlišení arc secHodnota rozlišení ciferníkuZobrazení toleranceVstupy pro snímačKompatibilitaDynamické funkceKlasifikaceDatové rozhraníŘídicí vstupyŘídicí výstupyAnalogový výstupNapájení energií
2120550
EMD-832P-48-W1
± 2000 / ± 200 / ± 20
± .100" / ± .010" / ± .001"
1 / 0,1 / 0,02
0,1 arc sec / 1 arc sec
0,005 mrad / 0,0005 mrad
LED 5 Class
2
Federal
Max, Min, TIR, Nominal
5
RS232C
3
5
±5Vdc
Akumulátor, 10 h za plného zatížení nebo 120VAC/240 VAC 50-60 Hz přes síťový zdroj
2120551
EMD-832P-48-W2
± 2000 / ± 200 / ± 20
± .100" / ± .010" / ± .001"
1 / 0,1 / 0,02
0,1 arc sec / 1 arc sec
0,005 mrad / 0,0005 mrad
LED, 5 class
2
Federal
Max, Min, TIR, Nominal
5
RS232C
3
5
±5Vdc
Provoz na baterie / 230 V / 50 Hz